Launch a wide spectrum of brightness and color into your studio with the blue/silver-finished ARRI Orbiter LED Light without Yoke, Lens, and Cable, a tunable color light system with a powerful color engine and versatile, changeable optics. Sporting a processor four times faster than the SkyPanel, ARRI's 190-LED Spectra system features a wide range of color features allowing you to create an enormous range of colors with its six-color light engine including red, green, blue, amber, cyan, and lime LEDs. Featuring a high CRI of 98 and a TLCI of 95, it offers a 2000 to 20,000K color temperature range to match just about any lighting situation, and it also features 100 to 0% dimming with smooth, continuous adjustment. The light also features multiple sensors, including a smart color sensor mode to sense the surrounding light and adjust its output for fine color accuracy, a 3-axis accelerometer that senses pan, tilt, and roll movements, an ambient light sensor to keep your display readable, heat sensors to keep the light cool, and even a magnetometer to orient your light within its geography.

The Orbiter features a highly portable design that can change its optics with a breeze using ARRI's Quick Lighting Mount (QLM), a bayonet-style connection similar to a camera lens mount. Available optics include 15, 30, and 60° open-face optics that produce a directional beam; 15, 25, and 35° projection optics that produce a sharp, focused beam with evenly distributed color; and small, medium, and large domes that provide a large area of soft light. The light can also be used with separately available light banks, barndoors, honeycombs, and other light-shaping accessories with the appropriate adapter.

Using ARRI's optional Lighting Operating System (LiOS), you can control all color modes, effects, and lighting grids right from the built-in control panel. LiOS features eight color modes such as CCT, HSO, RGBACL, Gel select, X/Y coordinates, source matching, effects, and a custom mode that allows you to save over 240 favorites which can be applied to a DMX or interface. It also has three operational modes—high color rendering, high output, and low noise—for your preferred mode performance. Interfaces include 5-pin DMX in and out, two LAN ports, two USB Type-A ports, a USB Type-C port, and an SD slot for future upgrades. It also features a sync input for future applications that will sync with your camera.

The light is weatherproof and can resist dust and water splashes. Its redesigned mounting points secure an optional yoke for positioning with a +/-90° tilt, and the yoke features a standard 1 1/8" Junior pin mounting point.

Orbiter Option

Powerful Color

Optional LiOS (Light Operating System)

Full Suite of Sensors

Durable Build

The Manual Yoke with Spigot for Orbiter from ARRI replaces the light's pole-operated yoke or provides one for Orbiters purchased without a yoke. Panning and tilting are done manually on the fixture. The yoke has a spigot for mounting onto a stand or clamp.

This 23' long Power Cord with Switch for L-Series Fresnels from ARRI provides mains power to the L5, L7, and L10 series LED fresnel lights. It features a powerCon True 1 connector and a heavy-duty inline power switch.

The Control Panel for Orbiter from ARRI allows adjustments of the Orbiter's functions such as color balance, special effects, and light intensity. The controller has a 4" full-color display, quick-navigation buttons, and integrated sensors, and can be separated from the fixture and used remotely via an optional 16.4' or 49.2' cable.

Ideal for hanging fixtures or lights mounted on tall stands, this 16.4' ARRI Cable for Orbiter Control Panel connects the removable panel to the light to control its functions.

The 30-Degree Open Face Optic for Orbiter LED Light narrows the 80-degree beam spread of the fixture to allow selective lighting or long throw work. Thanks to ARRI's QLM bayonet mounting system, the lenses attach and can be swapped out in a flash.

This is an ARRI 4-Leaf Barndoor Set for the 650W Fresnel, 200W HMI, 400W Pocket PAR, and Pocket Lite. Barndoors attach to the front of a light and are used to restrict light from areas of a set. They have either four or eight leaves that can be adjusted. ARRI barndoors are heat resistant and rotatable.